Wireless Remote Controlled Mini Alarm System with IR Infrared Motion Sensor& 105dB Loud Siren
1. We here advise you to take a video when you opening the parcel in case of your receive the incomplete parcel or defective goods.
2. As usually,we declare the value by a lower value like USD21(For Postal Service) Or USD30~USD52 For DHL shipping.If you have any special request,please leave a message in your order.Please kindly noted that we don't accept the returned goods due to the customs duty.
In order to protect your right,please feel free to contact me if you have any question.
Wireless Home Security Alarm System Remote Control Anti-theft IR Infrared Motion Sensor Alarm Detector + 2 Remote Controllers
1) Wireless, infrared detector, motion-activated
2) Accurate identification, 5s owner identification delay alarm
3) Long-range multi-channel wireless remote control
4) Adjustable mounting unit
5) Include 2 direct infrared remote controls; please use it directly facing to the sensor
1) Alarm sound level: 105dB (decibels)
2) Remote control distance: about 0-4 meters (open land)
3) Detection range: 0-4 meters distance
4) Working voltage: Direct current 6V
5) The motion detector power by 4 AA batteries (not included)
6) Size: You can see the details in the pictures
7) Color: White
1) Warning devices on the remote control infrared range of protection should be able to look straight can not have obstacles.
2) Install warning devices should be avoided near infrared heat source, such as hot and cold air outlet,
air conditioning vent, heater, cooler, etc, to avoid the straight door.
3) There should be 10 to 30 degree angle between the wall and remote control infrared warning devices;
you can adjust the detection distances according to actual installation angle.
4) Warning devices as remote control infrared lens in the human lateral movement relative to the most sensitive
infrared detection, and vertical motion sensitivity is poor, so the installation should pay attention to the angle
between the horizontal and height detectors, which have great impact protection area.
How to use:
1) Turn the power switch, power indicator twinkle 1 time, said the self-test is normal.
2) The detector standby for 10s, you have to leave its detective area in 10s
3) After 10s, if there is someone coming into the detective area, it will delay for 5s giving you opportunity to show that
you are the owner by using the remote controller. After 5s,it will buzz for 30s if it do not receive any signal.
4) You can shut the buzz down by using the remote controller
1 x Infrared detector
2 x Remote controllers
1 x Adjustable mounting unit
Nous vous recommandons également
48VDC 0.5A POE (Power on Ethernet) Injector for CCTV POE IP Camera POE Switch Power Adapter Covered
DC12V 1A POE (Power Over Ethernet) Injector 12W Wall Plug POE Switch for CCTV POE IP Cam Power
24V1A 24W POE (Power on Ethernet) Injector for CCTV POE IP Camera POE Switch Ethernet Power Adapter
2 in 1 Retractable Tape Measure Style Micro USB Data Charge Cable for iOS Android 4 Color Available